FENN MODEL 101 - 10.500" DIA. X 12.000" WIDE 2-HIGH ROLLING MILL - AS-IS CONDITION
The FENN Model 101 is a heavy-duty industrial rolling mill currently configured for 2-High operation, with the ability to be adapted for combination 2-High / 4-High rolling. The machine was previously used for cold rolling steel at a steel service center and was reportedly operational when removed from production. International Rolling Mills (IRM) acquired the mill at the facility's surplus equipment auction.
The mill is equipped with its existing 2-High rolls, 100 HP DC main-drive motor, heavy-duty speed reducer, and mechanical screwdown system. It is offered as-is, where-is, and has not been operated, refurbished, or recommissioned by IRM since acquisition.
IRM can also refurbish, re-engineer, and upgrade the mill to suit a customer's particular rolling application. Potential upgrades include new rolls, a modern AC drive and electrical control system, powered screwdowns, roll heating, instrumentation, guarding, and other application-specific equipment. Refurbishment and upgrades are available by separate quotation.
EQUIPMENT OVERVIEW & TECHNICAL SPECIFICATIONS
- Manufacturer: FENN
- Model: 101
- Current Configuration: 2-High
- Nominal Roll Diameter: 10.500"
- Nominal Roll Face Width: 12.000"
- Mill Housing: Heavy-duty four-column construction
- Total Column Cross-Sectional Area: Approximately 318 sq. in.
- Mill Separating-Force Capacity: Approximately 550,000 lbf
- Main Drive: Baldor 100 HP DC motor
- Speed Reducer: Horsburgh & Scott RD-4000, 6.5:1 ratio
- Roll Gap Adjustment: Mechanical screwdowns
The machine is currently configured for 2-High rolling. A 4-High work-roll assembly can be supplied as an optional upgrade.
MAIN DRIVE & SPEED REDUCER
Baldor DC Motor Specifications:
- Manufacturer: Baldor Electric Company
- Catalog Number: D50100P
- Rated Horsepower: 100 HP
- Motor Type: Stabilized Shunt DC
- Armature Voltage: 500 VDC
- Armature Current: 161 Amps
- Rated Speed: 1,750 / 2,000 RPM
- Frame: 368AT
- Duty: Continuous
- Insulation Class: F
Horsburgh & Scott Speed Reducer Specifications:
- Manufacturer: Horsburgh & Scott
- Model / Size: RD-4000
- Type: Herringbone / Helical Gear Reducer
- Reduction Ratio: 6.5:1
- Nameplate Horsepower Rating: 90.8 HP
- Rated Input Speed: 1,750 RPM
- Service Factor: 1.0
- Oil Capacity: Approximately 62 U.S. Gallons
The existing DC motor, speed reducer, and associated mechanical drivetrain are supplied in their present condition. IRM did not acquire the original DC drive or electrical controls. A compatible drive and control system would need to be supplied, or the existing main drive could be modernized.
OPTIONAL 4-HIGH CONFIGURATION
IRM can manufacture and supply a new 4-High work-roll assembly, including work-roll chocks, bearings, associated mechanical components, and applicable engineering drawings.
The standard FENN Model 101 combination configuration utilizes nominal 3.250" diameter work rolls supported by the nominal 10.500" diameter backup rolls. Alternative work-roll diameters can be evaluated subject to mechanical feasibility and final engineering requirements.
Work rolls and any associated application-specific modifications can be supplied or coordinated separately. Pricing and scope for a 4-High conversion or any additional upgrades are available upon request.
CONDITION & REFURBISHMENT OPTIONS
The mill was reportedly operational when removed from the steel service center. Its present operating condition has not been verified by IRM, and the machine is offered in its current as-is condition.
For customers seeking a turnkey or application-specific solution, IRM can evaluate the mill and provide a separate proposal for mechanical refurbishment, new rolls, electrical modernization, controls, heating, safety upgrades, and other custom features as required.
SALE CONDITIONS AND EQUIPMENT ACCEPTANCE
The FENN Model 101 is offered as-is, where-is, in its present mechanical and electrical condition at International Rolling Mills' facility in Pawtucket, Rhode Island.
The equipment has not been operated or tested by IRM since acquisition. Its previous operating history is provided for informational purposes and does not constitute a guarantee of present operating condition.
The purchaser is encouraged to inspect the machine prior to purchase.
No Factory Acceptance Test, operational demonstration, or commissioning is included in the as-is sale.
The equipment is offered without warranty or guarantee of mechanical condition, operating performance, fitness for a particular application, or ability to achieve specified rolling results, subject to the applicable terms and conditions of sale.
REPRESENTATIVE IMAGES
Photographs provided show the actual FENN Model 101 rolling mill and existing drive equipment. The mill will be supplied in its present condition, subject to the final agreed scope of supply.
FENN MODEL 101 - 10.500" DIA. X 12.000" WIDE 2-HIGH ROLLING MILL - AS-IS CONDITION
The FENN Model 101 is a heavy-duty industrial rolling mill currently configured for 2-High operation, with the ability to be adapted for combination 2-High / 4-High rolling. The machine was previously used for cold rolling steel at a steel service center and was reportedly operational when removed from production. International Rolling Mills (IRM) acquired the mill at the facility's surplus equipment auction.
The mill is equipped with its existing 2-High rolls, 100 HP DC main-drive motor, heavy-duty speed reducer, and mechanical screwdown system. It is offered as-is, where-is, and has not been operated, refurbished, or recommissioned by IRM since acquisition.
IRM can also refurbish, re-engineer, and upgrade the mill to suit a customer's particular rolling application. Potential upgrades include new rolls, a modern AC drive and electrical control system, powered screwdowns, roll heating, instrumentation, guarding, and other application-specific equipment. Refurbishment and upgrades are available by separate quotation.
EQUIPMENT OVERVIEW & TECHNICAL SPECIFICATIONS
- Manufacturer: FENN
- Model: 101
- Current Configuration: 2-High
- Nominal Roll Diameter: 10.500"
- Nominal Roll Face Width: 12.000"
- Mill Housing: Heavy-duty four-column construction
- Total Column Cross-Sectional Area: Approximately 318 sq. in.
- Mill Separating-Force Capacity: Approximately 550,000 lbf
- Main Drive: Baldor 100 HP DC motor
- Speed Reducer: Horsburgh & Scott RD-4000, 6.5:1 ratio
- Roll Gap Adjustment: Mechanical screwdowns
The machine is currently configured for 2-High rolling. A 4-High work-roll assembly can be supplied as an optional upgrade.
MAIN DRIVE & SPEED REDUCER
Baldor DC Motor Specifications:
- Manufacturer: Baldor Electric Company
- Catalog Number: D50100P
- Rated Horsepower: 100 HP
- Motor Type: Stabilized Shunt DC
- Armature Voltage: 500 VDC
- Armature Current: 161 Amps
- Rated Speed: 1,750 / 2,000 RPM
- Frame: 368AT
- Duty: Continuous
- Insulation Class: F
Horsburgh & Scott Speed Reducer Specifications:
- Manufacturer: Horsburgh & Scott
- Model / Size: RD-4000
- Type: Herringbone / Helical Gear Reducer
- Reduction Ratio: 6.5:1
- Nameplate Horsepower Rating: 90.8 HP
- Rated Input Speed: 1,750 RPM
- Service Factor: 1.0
- Oil Capacity: Approximately 62 U.S. Gallons
The existing DC motor, speed reducer, and associated mechanical drivetrain are supplied in their present condition. IRM did not acquire the original DC drive or electrical controls. A compatible drive and control system would need to be supplied, or the existing main drive could be modernized.
OPTIONAL 4-HIGH CONFIGURATION
IRM can manufacture and supply a new 4-High work-roll assembly, including work-roll chocks, bearings, associated mechanical components, and applicable engineering drawings.
The standard FENN Model 101 combination configuration utilizes nominal 3.250" diameter work rolls supported by the nominal 10.500" diameter backup rolls. Alternative work-roll diameters can be evaluated subject to mechanical feasibility and final engineering requirements.
Work rolls and any associated application-specific modifications can be supplied or coordinated separately. Pricing and scope for a 4-High conversion or any additional upgrades are available upon request.
CONDITION & REFURBISHMENT OPTIONS
The mill was reportedly operational when removed from the steel service center. Its present operating condition has not been verified by IRM, and the machine is offered in its current as-is condition.
For customers seeking a turnkey or application-specific solution, IRM can evaluate the mill and provide a separate proposal for mechanical refurbishment, new rolls, electrical modernization, controls, heating, safety upgrades, and other custom features as required.
SALE CONDITIONS AND EQUIPMENT ACCEPTANCE
The FENN Model 101 is offered as-is, where-is, in its present mechanical and electrical condition at International Rolling Mills' facility in Pawtucket, Rhode Island.
The equipment has not been operated or tested by IRM since acquisition. Its previous operating history is provided for informational purposes and does not constitute a guarantee of present operating condition.
The purchaser is encouraged to inspect the machine prior to purchase.
No Factory Acceptance Test, operational demonstration, or commissioning is included in the as-is sale.
The equipment is offered without warranty or guarantee of mechanical condition, operating performance, fitness for a particular application, or ability to achieve specified rolling results, subject to the applicable terms and conditions of sale.
REPRESENTATIVE IMAGES
Photographs provided show the actual FENN Model 101 rolling mill and existing drive equipment. The mill will be supplied in its present condition, subject to the final agreed scope of supply.
Imperial
| Backup Roll Diameter | 10.5" |
| Backup Roll Width | 12" |
| Roll Material | High Carbon Chromium Alloy Steel |
| Roll Gap Adjustment | Dual Electro-Mechanical Screwdowns |
| Mill Power | 100 HP DC Motor |
| Mill Separating Force | Approximately 550,000 LBS |
| Mill Controls | No electrical controls included. |
We use cookies to improve your experience. Privacy Policy.