Used Equipment: Rolling Mills 2-Hi

IRM MODEL 5060H 5" X 6" 2HI HOT LAB ROLLING MILL

IRM MODEL 5060H 5" X 6" 2HI HOT LAB ROLLING MILL

SPECIFICATIONS:
ROLL DIAMETER: 5.000"
ROLL WIDTH: 6.000"
ROLL MATERIAL: D2
MILL POWER: 2 HP AC GEARMOTOR
MILL VOLTAGE: 220V
MILL PHASE: THREE
MILL SPEED: 0 - 17 RPM

 

INCLUDES:
20,000 LBS LOAD CELLS
HEATED ROLLS UP TO 450 F
25:1 SCREWDOWN ASSEMBLIES
DIGITAL HEIGHT INDICATORS
1 YEAR FULL WARRANTY

THIS BRAND NEW MILL IS IDEAL FOR R&D OR PRODUCTION WORK. IT IS MOUNTED ON A HEAVY-DUTY MOBILE WORK TABLE FOR EASY MOVEMENT AROUND YOUR LAB. EACH ROLL CAN BE INDEPENDENTLY HEATED UP TO 450 F. ROLL GAP CAN BE ADJUSTED INDEPENDENTLY OR SIMULTANEOUSLY USING 25:1 SCREWDOWN ASSEMBLIES WITH DIGITAL HEIGHT INDICATORS AS REFERENCE. CONTACT US TODAY FOR MORE INFORMATION!


RUESCH 8" X 8" 2HI ROLLING MILL WITH POWER ASSIST SCREWDOWNS

RUESCH 8" X 8" 2HI ROLLING MILL WITH POWER ASSIST SCREWDOWNS

ROLL DIA: NOMINAL 8.000”

ROLL WIDTH: 8.000”

ROLL HARDNESS: APPROXIMATELY 60 - 62 ROCKWELL C

ROLL TIR: LESS THAN 0.0001” TIR

ROLL FINISH: INDUSTRIAL HARD CHROME PLATED 2RA FINISH

ROLL ADJUSTMENT: ROLL GAP WILL BE ADJUSTED BY TWO HAND WHEELS WITH A POWER ASSIST SYSTEM. THESE WHEELS CAN LOCK TOGETHER FOR SIMULTANEOUS ROLL GAP ADJUSTMENT OR CAN SPLIT APART FOR VERY PRECISE SIDE TO SIDE ADJUSTMENT.

MILL PINION: TWO HEAVY-DUTY HERRINGBONE GEARS DRIVE THE TWO ROLLS

SIMULTANEOUSLY.

MILL POWER: 25 HP

MILL VOLTAGE: 220V

MILL PHASE: 3 PHASE

MILL FUNCTIONS: STOP, START, FORWARD, REVERSE, AND POWER ASSIST FUNCTIONS.

MILL TABLES: WILL BE INSTALLED ON ENTRY AND EXIT OF THE MILL. ENTRY TABLE WILL HAVE ADJUSTABLE GUIDES.

MILL DIMENSIONS: APPROXIMATELY 96” L X 48” W X 90” H

MILL WEIGHT: APPROXIMATELY 8,000 LBS


FENN MODEL 121 12.5" X 9.875" 2HI AGC REVERSING ROLLING MILL

FENN MODEL 121 12.5" X 9.875" 2HI AGC REVERSING ROLLING MILL

ROLL DIA: 12.500”

ROLL WIDTH: 9.875”

ROLL JOURNAL: 9.000”

EACH COLUMN SECTION: 9.875” X 11.250”

TOTAL COLUMN AREA: 444

MILL SEPARATING FORCE: APPROXIMATELY 840,000 LBS AT 100 RPM

MILL SCREWDOWNS: HYDRAULIC SCREWDOWNS WITH AUTOMATIC GAUGE CONTROLS. CONTROL CONSOLE WITH ALLEN BRADLEY PANEL VIEW.

MILL MOTOR: 125 HP DC (1750-2100 RPM)

MILL GEAR REDUCER: 58.01:1 RATIO

APPROXIMATE MILL DIMENSIONS: 154” L x 78” W x 112” H

 

INCLUDED:

(2) SPARE SETS OF 12.5” X 9.875” ROLLS

(1) 24” DIAMETER 10,000 LBS RECOILER (25 HP DC MOTOR)

(1) 10,000 LBS PAYOFF (10 HP DC MOTOR)

(1) HYDRAULIC POWER SUPPLY

MILL IS QUOTED AS-IS. ORIGINAL ROLL SIZE FOR THIS MILL IS 12.500” DIA X 14.000” WIDE BUT THE ROLLS WERE MODIFIED FOR THE AUTOMATIC GAUGE CONTROL.


BHS TORIN 8" X 10" 2HI ROLLING MILL WITH POWER SCREWDOWNS

BHS TORIN 8" X 10" 2HI ROLLING MILL WITH POWER SCREWDOWNS


FENN MODEL 101 12" X 16" 2HI ROLLING MILL WITH POWER SCREWDOWNS

FENN MODEL 101 12" X 16" 2HI ROLLING MILL WITH POWER SCREWDOWNS


RUESCH 5" X 8" 2HI ROLLING MILL

RUESCH 5" X 8" 2HI ROLLING MILL

Roll Size: 5" diameter x 8" Wide

Powered by: 7.5 HP GE

Gear reduced motor Speed: 30' feet per minute

Equipped with: precision roller bearings Entry and exit tables with adjustable entry guides.


STANDARD MACHINERY 5" X 8" 2HI ROLLING MILL

STANDARD MACHINERY 5" X 8" 2HI ROLLING MILL

Roll size: 4"OD x 6"Wide rolls

Roll Speed: 0 to 100 FPM

Power: 5 HP, 220 Volt, 3 Phase


WATERBURY FARREL 4" X 4" 2HI WIRE FLATTENING ROLLING MILL WITH PAYOFF AND RECOILER

WATERBURY FARREL 4" X 4" 2HI WIRE FLATTENING ROLLING MILL WITH PAYOFF AND RECOILER


WATERBURY FARREL 5" X 8" 2HI ROLLING MILL

WATERBURY FARREL 5" X 8" 2HI ROLLING MILL

This machine is totally reconditioned and in excellent condition. Waterbury Farrell 5" x 8" reversing type rolling mill is equipped with the following: uncoiler & recoiler, air brake and clutch, 10HP AC Motor, all roller bearings, all electrics and controls, spare rolls.


Request a Quote