Used Equipment: Slitting Equipment

Ruesch 76 Slitter

Ruesch 76 Slitter

Ruesch: Model 76

Specs:

2 5/8" arbors X 12" ring slitter
10 h.p. d.c. drive
N2783. s/n 6061
single winder
entry guide table
assorted tooling


Stanat Slitter Model# S180

Stanat Slitter Model# S180

Specifications: 36" Stanat pay-off P8-8-2400

Realiance: "Super T" VS Drive

Power: 15 HP 3 Phase 208 volts

Max cut: 8"

Cutter shaft diameter: 2-5/8 x 8"


Stanat Model S180 2 1/2 x 8

Stanat Model S180 2 1/2 x 8

Stanat Model S180 is 2 1/2 x 8 with a single recoiler.


Ruesch 177

Ruesch 177

Ruesch 177 is totally refurbished and in excellent condition. It has the following features: 24" Wide x 6-1/2" Diameter Arbor Slitter head and drive; 125 HP reliance DC motor 480V; to 1800 RPM; H.S. reducer with 157 HP rating; 18:07:1 ratio; arbors driven thru couplings; line speed 285 FPM @ 12" knife diameter; steel stripper ring assembly model N2241, S/N 5568. Hornsburg/Scott pinion stand; 157 HP; serv. factor 1.0 ratio 18:07:1, 850 RPM input; size 12" - W - 29' vertical distance between pinion shafts -12"; electric clutch.

Approximate dimensions: Head- 8.5'L x 4'W x 6.5'H

Weight: Head - 15,000 lbs.

Drive: 10'L x 7'W x 5'H Drive - 8,000 lbs.

Tooling: 96 pcs. 12"diameter x 500" knives; 194 pcs. spacers of various sizes-or we can quote a line up per your specifications on request.


Ruesch #149

Ruesch #149

Ruesch #149 is in excellent condition with 2-5/8" ID x 14" wide arbors.


Reusch Model 189 1.25

Reusch Model 189 1.25

Reusch Model 189 1.25 is a double recoiler with scrap winder and 2HP variable speed.


IRM Model 2009

IRM Model 2009

The IRM Model 2009 has a 2" diameter with 1/4" keyway x 9" long arbor. It includes an entry guiding system and pass line roller assembly with pinion stand.

Slitting capacity: up to 7" wide strip

Equipped with: two parallel hardened slitting arbors exactly 2.000" in diameter with .250" square keys the entire usable length. These shafts are parallel, concentric, heat treated, hardened and finish ground, square to the locating shoulders within .0001" T.I.R. The shafts have spanner or hardened hex take up nuts for the outboard end for tightening up the slitter assemblies.

Note: These machines are tailored to customer's specifications. Such as arbor widths, speeds, horse powers, number of recoiling arbors, and scrapwinders. This will determine the final price of the machine.


IRM Model 17518

IRM Model 17518

The IRM Model 17518 has a 1 3/4" diameter with .250" keyway x 18" long arbor.

Equipped with: Entry & Exit Guiding System 3 HP DC Motor Speed: 160 fpm

Slitting capacity:0-18" wide

Note: This machine can be tailored to customer's specifications.


Request a Quote